Turn the ignition to the On position but do not start the engine. Make sure you are in trip a.
Pin On Cars
If you have a push-button model do not press the brake pedal and press Start.
How to reset maintenance light on toyota tundra. After having your Toyota Tundra repaired the check engine light may remain on until you manually reset it. The procedure is applicable to the second-generation Toyota Tundra pickup truck 2007 to 2010. If playback doesnt begin.
Once done dashes blink off or loading bar full and done. The light itself is a warning system built into the vehicle to alert the driver that there may be necessary maintenance needed on the engine. Resting the maintenance light on your Toyota Tundra is no big deal if you know the right way to do it.
Remove the Negative - Terminal from the battery first for safety reasons. Step 1 Turn your key to the On notch and press your trip odometer knob until Trip A is displayed. Remove the Positive Terminal from the battery.
Reset low tire pressure warning light toyota tundra 2 generation. 2007-2017 Models Turn the ignition to the On position. In the future you also can ask your Toyota dealer to reset the light after changing the oil.
When a confirmation message appears select YES to accepting the maintenance reset. Put the ignition key into the slot and turn on the car without kicking off the engine. Once youre on TRIP A you need to turn the key off or press the STARTSTOP button once Press and hold the ODOTRIP button while turn on the ignition key Then youre gonna need to hold down the ODOTRIP button while you turn the key to position two and do not start it Continue to hold down the ODOTRIP button.
The Toyota Tundra is a pickup truck manufactured in the United States by the Japanese manufacturer Toyota since May 1999. Required Light on a Toyota Tundra Turn your key to the On notch and press your trip odometer knob until Trip A is displayed. If it does not press down the Reset or Trip button until the reading on the odometer displays Trip A.
Hold ODOTRIP BUTTON For At Least 5 Seconds Until RESETTING MAINTENANCE DATA is complete. Touch and Hold the Positive Terminal which you removed from the battery to a good ground on your Tundra for 5 seconds. Hold down the reset button reset and then switch on the ignition.
Along with the light the vehicle will send out a numbered code that most auto parts stores will. How to Reset the Maintenance Required Light on a Toyota Tundra. Select the YES and press.
How do you reset the maintenance required light on a 2011 Toyota Tundra. Key on engine off accessory mode keep holding reset trip button and youll see dashes or a loading bar. Truck is off press and hold odometer reset button.
Maintenance Reset Is Complete. 2007-2017 Models Tundra Maintenance Light Reset. Press the center button to select.
To reset the maintenance light on a 2011 toyota tundra you need to hold down the odometer reset button while the vehicle is in the on position then continue to hold it while you put it in the off position then set it back to the on position and allow it to reset the light. Select MAINTENANCE RESET. Turn your key to.
Follow these few simple steps to reset maintenance light Toyota that is not a Camry or Prius. When its time for an oil change the symbol. Here is another way for you to reset your ECM on the Tundra without having to wait.
Once you can see the reading on the Trip Metre A switch off the ignition. How to reset maintenance light on Toyota tundra. Switch the display to Trip A by pressing the display change button or.
Select Maintenance Reset. Turn The Ignition OFF. You can easily reset the maintenance light with the information that we gave earlier in this article.
Hold down the reset button reset and then switch on the ignition. Then power down the car by pushing the power button once. Switch the ignition on.
The odometer should read Trip A. Ad search tundra toyota used.
